Danjiangkou Fengying Machinery Equipment Co., Ltd
Aging furnace
Classification:
The aging furnace is a critical metal processing equipment with broad application prospects.
Contact:
Features
Aging Furnace: Principles, Features, and Applications
I. Principles and Characteristics of Aging Furnaces
The aging furnace is a critical metal processing equipment with broad application prospects.
Based on the principles of metal heat treatment, the aging furnace performs solution treatment and precipitation hardening to enhance the mechanical properties of metals. Specifically, the metal is heated at high temperatures for several hours, followed by controlled cooling, completing the entire heat treatment process. Common types include box-type aging furnaces, mesh-belt aging furnaces, and horizontal aging furnaces.
Key Features:
● High Precision Control: Accurately regulates temperature and duration within defined parameters to ensure consistent heat treatment.
● Superior Treatment Results: Optimizes solution treatment and precipitation effects, significantly improving metal hardness and strength.
● Rapid Heating: Achieves target temperatures quickly, reducing processing time while maintaining efficiency.
II. Application Fields
Aging furnaces are widely used in metal processing and manufacturing, including:
● Aerospace: Heat-treats aluminum alloys to achieve exceptional mechanical properties under high temperatures.
● Automotive Industry: Enhances the hardness and strength of body and engine components.
● Construction: Improves the strength and corrosion resistance of structural steel.
III. Daily Maintenance
● Heating Elements: Keep dry and clean; inspect and replace periodically.
● Transmission Parts: Lubricate bearings and gears regularly; replace worn components.
● Control System: Maintain continuous operation; calibrate periodically to ensure precision and stability.
Product Atlas
Keyword:
Aging furnace
COLLABORATION CASE
FAQ
Q
Insufficient aging hardness
+
A
Handling method:
① Appropriately increase the aging temperature
② Extend the insulation time
② Increase the frequency of the frequency converter to make the heat more balanced
Q
Stick furnace stick stick
+
A
Lay stainless steel flat iron on the track.
Q
Cold rod return not in place
+
A
Solution: Check the pressure rod photoelectric switch If the pressure rod photoelectric flashes, it should be replaced in a timely manner. Cold rod withdrawal is controlled by the pressure rod photoelectric If the pressure rod photoelectric is abnormal, the rod will not be returned properly
Q
Hot rod does not flip over
+
A
Solution: Check if the probe cylinder has output and if the magnetic switch of the probe cylinder has output. If there are no problems, then check if the relay in the middle of the flipping cylinder has output to solve the problem
Q
The tractor does not pull
+
A
①. Is there a squeezing signal If the intermediate relay is not checked for engagement
② Check if the traction limit switch is on, and replace it promptly if it is on
③ Is there any jump in the frequency converter? If there is a jump in the code, it needs to be restored to normal
The above three points must be checked and closed to ensure normal operation.
Q
Simple traction locomotive does not return
+
A
① Check if the frequency converter trips. If there is no output when the frequency converter trips, press the reset button to restore it.
② Check the limit, if there is any inexplicable light Just replace it
Q
How to deal with belt deviation?
+
A
Adjust the screw to tighten the belt properly Then the motor drives the belt to rotate, and the pulley on which side the belt deviates will be tightened Until the belt rotates normally.
Q
The foot sinks and does not respond
+
A
Solution: Check if the travel switch is in place and if there is a display on the PLC. If there is no display, turn the switch to adjust the position until there is a display, and then check if the oil pump motor is running Is the contactor engaged? Only when everything is normal can there be a settling action.
Q
Principles and Characteristics of Aging Furnaces
+
A
The aging furnace is a critical metal processing equipment with broad application prospects.
Based on the principles of metal heat treatment, the aging furnace performs solution treatment and precipitation hardening to enhance the mechanical properties of metals. Specifically, the metal is heated at high temperatures for several hours, followed by controlled cooling, completing the entire heat treatment process. Common types include box-type aging furnaces, mesh-belt aging furnaces, and horizontal aging furnaces.
Q
Ton Servo Fully Automatic Pure Electric Tractor
+
A
● One-Touch Operation: Start, stop, mold release, and sampling can be completed with a single button.
● Synchronized Communication: The tractor, extruder, cut-off saw, and cooling bed remain in constant communication, ensuring perfect synchronization with servo motor precision.
● Flexible Cutting Modes: Supports length-based cutting and joint-based cutting. The system automatically detects joints and performs precise cuts.
● Multi-Cavity Molding: Enables one-mold multi-cavity production, significantly improving output.
● Stable Servo Control: Equipped with 9–16 servo motors to control multiple actions, ensuring smooth and stable operation.
● Eco-Friendly Design: Includes an aluminum scrap recycling system for energy efficiency and environmental protection.
● Dual Operation Modes: Supports both automatic and manual mechanical operations for enhanced flexibility.
FACTORY
If you have already experienced our product, please let us know your true feelings. Your satisfaction is our driving force for progress, while your suggestions are our valuable asset for continuous improvement.
Social Media
CONTACT US
Email: zhangyu@fytractionmachine.com
Add: Fengying Machinery Factory, Donghuan Road Industrial Park, Danjiangkou City, Shiyan City, Hubei Province