Insufficient aging hardness

Handling method: ① Appropriately increase the aging temperature ② Extend the insulation time ② Increase the frequency of the frequency converter to make the heat more balanced

Stick furnace stick stick

Lay stainless steel flat iron on the track.

Cold rod return not in place

Solution: Check the pressure rod photoelectric switch If the pressure rod photoelectric flashes, it should be replaced in a timely manner. Cold rod withdrawal is controlled by the pressure rod photoelectric If the pressure rod photoelectric is abnormal, the rod will not be returned properly

Hot rod does not flip over

Solution: Check if the probe cylinder has output and if the magnetic switch of the probe cylinder has output. If there are no problems, then check if the relay in the middle of the flipping cylinder has output to solve the problem

The tractor does not pull

①. Is there a squeezing signal If the intermediate relay is not checked for engagement ② Check if the traction limit switch is on, and replace it promptly if it is on ③ Is there any jump in the frequency converter? If there is a jump in the code, it needs to be restored to normal The above three points must be checked and closed to ensure normal operation.

Simple traction locomotive does not return

① Check if the frequency converter trips. If there is no output when the frequency converter trips, press the reset button to restore it. ② Check the limit, if there is any inexplicable light Just replace it

How to deal with belt deviation?

Adjust the screw to tighten the belt properly Then the motor drives the belt to rotate, and the pulley on which side the belt deviates will be tightened Until the belt rotates normally.

The foot sinks and does not respond

Solution: Check if the travel switch is in place and if there is a display on the PLC. If there is no display, turn the switch to adjust the position until there is a display, and then check if the oil pump motor is running Is the contactor engaged? Only when everything is normal can there be a settling action.

Principles and Characteristics of Aging Furnaces

The aging furnace is a critical metal processing equipment with broad application prospects. Based on the principles of metal heat treatment, the aging furnace performs solution treatment and precipitation hardening to enhance the mechanical properties of metals. Specifically, the metal is heated at high temperatures for several hours, followed by controlled cooling, completing the entire heat treatment process. Common types include box-type aging furnaces, mesh-belt aging furnaces, and horizontal aging furnaces.

Ton Servo Fully Automatic Pure Electric Tractor

● One-Touch Operation: Start, stop, mold release, and sampling can be completed with a single button. ● Synchronized Communication: The tractor, extruder, cut-off saw, and cooling bed remain in constant communication, ensuring perfect synchronization with servo motor precision. ● Flexible Cutting Modes: Supports length-based cutting and joint-based cutting. The system automatically detects joints and performs precise cuts. ● Multi-Cavity Molding: Enables one-mold multi-cavity production, significantly improving output. ● Stable Servo Control: Equipped with 9–16 servo motors to control multiple actions, ensuring smooth and stable operation. ● Eco-Friendly Design: Includes an aluminum scrap recycling system for energy efficiency and environmental protection. ● Dual Operation Modes: Supports both automatic and manual mechanical operations for enhanced flexibility.

Simple Automatic Dual Tractor

● One-Touch Operation: Start, stop, mold release, and sampling can be completed with a single button. ● Synchronized Communication: The tractor, extruder, cut-off saw, and cooling bed remain in constant communication, ensuring perfect synchronization with servo motor precision. ● Flexible Cutting Modes: Supports length-based cutting and joint-based cutting. The system automatically detects joints and performs precise cuts. ● Multi-Cavity Molding: Enables one-mold multi-cavity production, significantly improving output. ● Stable Servo Control: Equipped with 9–16 servo motors to control multiple actions, ensuring smooth and stable operation. ● Eco-Friendly Design: Includes an aluminum scrap recycling system for energy efficiency and environmental protection. ● Dual Operation Modes: Supports both automatic and manual mechanical operations for enhanced flexibility.